Carpet Plastic Protection Film Self Adhesive 1M x 100M
Warning: This Product is designed for carpets ONLY!
Easy to apply and remove, clean removal no residue leaving your carpets as good as new!
Save hours of cleaning time and costly damage!
No more drop sheets required, our self adhesive plastic carpet film protects an array of different carpets, easy to apply and remove. Protects from dirt, dust, paint & spills during renovation, DIY’s and construction work.
Our self-adhesive transparent carpet film adheres well to carpets and rugs eliminating the spillage and leakage problem when using drop sheets.
Protect your carpets from times of heavy foot traffic during construction, cover over carpeted stairs in appartment buildings to save hours of cleaning and arguments with displeased neighbours.
This product is "super sticky" with a very high adhesive coating needed for carpet adhesion, therefore this product is recommended for use on carpets and rugs only!
Protective Films Carpet Protection cover has a unique adhesive system for rough surfaces making it suitable for:
. Protecting carpet broadloom
. Protecting carpet tiles
. Protecting carpet rugs
. Protecting carpeted stairs
Carpet film may be applied for up to 3-4 months (guide only). Please read the instructions.
For more info send an email via our contact form
Protective Films Carpet Protection Is:
. quick and very easy to apply
. extremely strong wearing
. 'sticks' to the surface without moving
. does not need tape
. very easy to remove
. leaves no residue behind
. ideal for protecting carpeted stairs
. ideal protection when using carts, trolleys and scaffolding etc.
Application: surface needs to be dry, clean and fully cured.
Begin: start by removing the packaging. Unwind the roll by hand for the first 10 cm. Lay on the floor, apply the the film and unroll by hand, foot or applicator
Simply overlay the film on the seems to ensure a secure protection.
Removing: when removing try folding the corners inwards so that dust and debris are contained, fold into a small parcel and throw away.
Important: when protecting newly laid carpet or carpet tiles the surface needs to be dry, clean and fully hardened. In the case of masking broadloom carpet we would advise a minimum drying time of around 48 hours. Carpet tiles should be cured for at less a minimum of 24 hours.
DISCLAIMER: Carpet Protector Film is ONLY suitable for carpets, rugs and textile surfaces because of its high adhesive properties. The surface needs to be dry, clean and fully cured, this also applies to the sub-floor. Protective Film is not liable of any loses or damages caused by the use of this product and recommend proper testing is cared out before application. Protective Film encourage regular monitoring of all protection products over the life time of use. Please read our terms and conditions for more info.