Self Adhesive Film Stone Tops And Textured Surfaces BLUE 850mm x 200M

-16% Stick n Protect  Self-Adhesive Film For Stone Tops & Textured Surfaces BLUE Masking 850mm x 200M (170 sqm)

Masking for textured surfaces. Industrial 'self-adhering' plastic protection commonly used to protect non smooth surfaces needed higher adhesive levels to adhere. This product can also be used in renovations to protect different furnishings from scratches! Poly wrap masking is perfect for avoiding damages but could also save hours of cleaning time!

Note: If you need a film for melamine or white satin board please use our “lower tack thicker” Green Stick n Peel for easy and clean removal.

This film is not related to any blue masking film on the market and has been specifically design for

For more info send an email via our contact form

Write a review

Please login or register to review

   . Easy to apply Acrylic based adhesive which adheres to most smooth and textured surfaces


   . Blue/Green tinted PE film is designed for temporary protection in masking applications


   . Heat resistant to 60 degrees and UV resistant for up to 6 months


   . Protection from scuffing scratches during transportation and storage Protects against over-spray and lacquers

How do I install Stick & Peel to the back of a melamine door?

1. pull the film over the panel you are masking and stick the first 50mm of film to the top of the door or panel

2. from the top using a rag or plastic applicator (I find a scrunched up rag works best) press the film from side to side working towords the roll

3. when you have completely masked over the door cut the film proud of the doors edges as not to damage it

4. now take some abrasive paper (sand paper) between 150-300 grit and lightly sand the sharp arris of the edge of the melamine door

FINISHED this will leave you with 100% masking with no over spray possible!

This film has been tested on glass windows for a 60 day UV period with clean removal results "guild only" as extreme weather conditions can shorten or extend product life! That's why we recommend 60 days usage.


DISCLAIMER: This protection film is NOT suitable for sheet metal, colour bond, tin or material that conduct extra high temperature of heat. Using adhesive film on such surfaces can cause the adhesive to dry out making it difficult to remove and may leave glue behind. The best way to remove adhesive glue is by using a steamer as they do to remove car window tinting.


Any surface needs to be dry, clean and fully cured. Protective Film is not liable of any loses or damages caused by the use of this product and recommend proper testing is cared out before application. Protective Film encourage regular monitoring of all protection products over the life time of use. Please read our terms and conditions for more info.

  • $146.36
  • $123.00
  • Inc GST: $135.30
  • 6 or more $115.00 (Inc GST: $126.50)
  • 10 or more $105.00 (Inc GST: $115.50)

Available Options

Tags: Self-Adhesive Films, Surface Protection, Stick n Protect